top of page

KNIGHT LIGHTING SOLUTIONS ACCESSORIES

Hardware

Knight Accessory Mount & Color Frame

Part # KLS-KNIGHT-CFA

The Knight Accessory Mount attaches to the front of Knight Series spot/ flood luminaires via the supplied 3 x 6-32 screws.  The accessory mount includes a color frame for user supplied media and accepts 3-1/8” diameter or square accessories. The Knight Accessory Mount is needed to use most Knight accessories.

Knight Mega-Clamp

Part# KLS-MEGA-CLAMP

The KLS Mega-Clamp fits on 1” pipe to 2” pipe (1-1/4” OD tube to 2.5” OD tube) and can be used with all Knight Lighting luminaires and DMX power supplies. It has a Working Load Limit of 600 lb. 273 kg. The Mega-Clamp hardware is 1/2″ × 1″ long hex head Grade 5 zinc bolt, a 1/2″ × 3″ long square head set screw and a Belleville spring washer.

Beam Control
Cable

Knight Projector Front

Part # KLS-KNIGHT-PROJECTOR

The Knight Projector Front is a framing projector accessory that mounts on the front barrel of the luminaire. With its 25-45 degree zoom optics for hard and soft focus, gobo accessory holder and 4x framing shutters, any Knight Series luminaire can be converted into an ellipsoidal spotlight.

Knight Base

Part # KLS-KNIGHT-BASE

The Knight Base is an unweighted base 5” diameter x 1” tall w/ 3/8” threaded hole and mounting bolt. The Knight Base has two through holes for screwing the base down to the stage or scenery.

Knight Beam Reducer

Part # KLS-2.2LENS

The Knight Beam Reducer is an HD lens accessory that reduces the narrow beam of Knight Series luminaires and Knight Series Projector by 2.2X. Requires KLS-KNIGHT-CFA when using with Knight Series Spot/ Flood luminaires.

Knight Linear Spread Lens

Part # KLS-KNIGHT-LSL

The Knight Linear Spread Lens is a holographic lens made of UV resistant acrylic to shape the beam in a linear pattern for use on columns, graphics or any design that requires an elongated beam. Setting the Knight Series focus to narrow will give a longer thin linear beam and adjusting the focus to wide will shorten and widen the linear beam. The lens can be rotated easily 360° and is for use in the KLS-KNIGHT-CFA accessory.

Knight Snoot

Part # KLS-KNIGHT-SN

The Knight Snoot is an accessory to control light spill. The Knight Snoot can be used directly on all Knight Series fixtures with 3 x 6-32 screws or with the KLS-KNIGHT-CFA.

Knight Barndoor

Part # KLS-KNIGHT-BD

The Knight Barndoor is an adjustable 4-leaf accessory for shaping or blocking the light beam and can be rotated 360° to meet various angles.

Knight Cable

KLS-KNIGHT-EXT10          10' - 9 PIN MALE TO 9 PIN FEMALE KNIGHT HEAD TO POWER SUPPLY EXTENSION CABLE

KLS-KNIGHT-EXT25          25' - 9 PIN MALE TO 9 PIN FEMALE KNIGHT HEAD TO POWER SUPPLY EXTENSION CABLE

KLS-KNIGHT-EXT50          50' - 9 PIN MALE TO 9 PIN FEMALE KNIGHT HEAD TO POWER SUPPLY EXTENSION CABLE

bottom of page